The Chute Tamer™ recovery deployment control is an innovative device that gives you control over your rocket’s parachute for higher flights and fewer recovery worries!  Get the performance that you have been dreaming about out of your existing rockets! 

TO SEE THE CHUTE TAMER SITE CLICK THIS LINK www.chutetamer.com

Features and Benefits

NO E-MATCH NEEDED- The Chute Tamer™ control provides delayed parachute deployment without any explosive black powder charges other than the rocket engine’s built in ejection charge. 

EASY RETROFIT works with existing “single deploy” rockets.

LOWER RISK OF LOOSING ROCKETS -The deployed parachute is  prevented from opening at apogee reducing the effects of higher winds aloft preventing a long walk, or a lost rocket.

Built in BEEP - The Chute Tamer™ incorporates a loud built in tone generator to locate your rocket in tall grass and corn fields

Small Size & Light Weight – The Chute Tamer™ control’s small size allows it to fit into rocket air frames with an inside diameter of 2.1 inches or larger.  The Chute Tamer™ control’s light weight (125 grams, or 4.4 ounces) allows it to be used in most rockets using “F” engine power and above with a minimal reduction in altitude.

EASY SETUP - The Chute Tamer™ control’s are all accessible from the outside of the unit:

• Audible Feedback Tone – verifies timer setting and heating element continuity.

• External Delay Programming –   All essential pre-flight functions: delay time programming and verification, heating element replacement, and turning it on and off are conveniently located on the outside of the device.  The only reason to open the Chute Tamer™ control is to replace the battery.

ALL UNITS INCLUDE:

• Delay Time Calculation Worksheet – A simple worksheet, completed by you for each rocket and motor combination ensures quick, reliable, and hassle-free delay time determination.

• Secure Tether Point- The Chute Tamer™ control has a secure attachment point to connect it securely to your rocket’s existing shock cord or directly to the nose cone eye bolt.

• 12 Snap-in Heating Elements- These modular snap-in heating elements are easy to replace and always in the proper position for binding the parachute.  The heating element is encased inside of a modular plug to protect it from damage and to shield it during heating operation.

• HEAVY DUTY IMPACT AND HEAT RESISTANT ENCLOSURE

• COMPLETE INSTRUCTIONS